Formlabs resin for 3D printer Durable 1L
Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.
Packaging:
- 1000 ml
Dental Model V3 1L resin for Formlabs 3D printer
Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.
Version 3:
- This version of Model Resin is a reformulation of the previous version.
- With the new V3 resin, you can print even more accurate models in half the time.
- Supports print resolutions: 100 and 50 microns.
- Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.
Packaging:
- 1l
Formlabs resin for the BioMed Durable 1L 3D printer
BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.
This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long term skin contact and short term tissue, bone and dentine contact applications.
Resin dedicated to 3D printers from the Form 3B series. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.
In order for physicians and manufacturers to rely on this new material in contact with patients, Formlabs strictly followed USP Class VI procedures to be certified for use in long-term skin applications (greater than 30 days) and short-term contact with tissue, bone and dentin (less than 24 hours). The Formlabs manufacturing facility is ISO 13485 compliant and strict quality control measures are rigorously adhered to.
Technical data:
- The highest tensile strength - 29.1 MPa.
- Modulus of elasticity - .99 GPa.
- Elongation at break - 33%
- Impact resistance (Notched Izod) - 98 J/m.
Packaging:
- 1 liter
Formlabs resin for the 3D printer Dental Model V2 1l
Designed for printing models of crowns and bridges with replaceable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details down to 35 microns and removable stencils with a consistent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital model production.
Packaging:
- 1 liter
Surgical Guide SG 1L resin for Formlabs 3D printer
A resin with first class biocompatibility, intended for dentists to create precise surgical templates. Prints made of this material can be sterilized in an autoclave and are allowed to come into contact with skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implant procedures. After final processing, prints made of this material can become fully transparent for better positioning.
Recommended printing on a layer of 100 or 50 micrometers (Form 2) and 100 micrometers (Form 3B).
Meets ISO standards:
- EN ISO 10993-5:2009 (non-cytotoxic)
- ISO 10993-10:2010/(R)2014 (non-sensitizing)
- ISO 10993-10:2010/(R)2014 (non-irritating)
- EN ISO 13485:2016
- EN ISO 14971:2012
Packaging:
- 1 liter
Dental LT ClearV2 1L resin for Formlabs 3D printer
Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.
- The material has been assessed according to ISO 10993-1:2018.
Application:
- Occlusal splints.
- Retention appliances.
- Occlusal overlays.
- Surgical splints and guides.
- Fastening elements.
- Other orthodontic accessories.
Material properties:
- Bending modulus 2300 MPa.
- Elongation at break 12%.
- Shore hardness: 78D.
- Color transparent.
Packaging:
- 1 liter
Formlabs resin for Castable 1L 3D printer
First class biocompatible material (EN-ISO 10993-1:2009/AC:2010, USP Class VI), intended for dentists to create precision surgical guides, dental models or similar details.
Packaging:
- 1 liter
Castable WAX 1L 3D printer resin
Resin for jewelry and dental prosthetics.
- Does not require light polymerization after printing.
The original Castable Wax Resin is intended for the production of lost models in foundry. The material contains 20% wax and, thanks to its properties, does not leave any residue after firing and reflects the contour of the form well. Suitable for precision casting, it allows you to reproduce complex surfaces without visible layer lines. After printing, the models do not require additional hardening.
Also recommended for dental prosthetics:
- Crowns.
- Bridges.
- Partial dentures.
- Skeletons.
Packaging:
- 1L
Standard 1L resin for Formlabs 3D printer
The printing material in SLA technology is a liquid photopolymer resin hardened with a laser beam. Formlabs standard materials are the most universal resins for all applications. Strandard resins maintain high model accuracy without the risk of losing strength. Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin both in various industries and in medicine.
Colors:
- Transparent (Clear)
- White
- Gray (Grey)
- Black
Application:
- Conceptual models and prototypes.
- Transparent elements.
- Models requiring a smooth surface.
Physical data:
- Tensile strength 63 PMa.
- Elongation at break 6%
- Shore hardness D75.
- Modulus of elasticity 2.2 GPa.
Packaging:
- 1l
Formlabs resin for Temporary CB 1L 3D printer
The material used for the production of temporary crowns, overlays, veneers and bridges in a natural enamel color. The material for printing requires the use of a stainless steel worktable. Supported layer height: 50 micrometers. Curing required.
Meets ISO standards:
EN ISO 10993-5: 2009 (non-cytotoxic)
ISO 10993-10: 2010 / (R) 2014 (non-irritating)
ISO 10993-10: 2010 / (R) 2014 (not sensitizing)
ISO 10993-3: 2014 (not genotoxic)
ISO 10993-1: 2009 (non-toxic)
Temporary CB resin is a medical device as defined in the EU Medical Device Directive (93/42 / EEC) and Chapter 201 (h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with CB provisional resin have been assessed according to ISO 10993-1: 2018 (Part 1: Assessment and testing as part of a risk management process) and ISO 7405: 2009 / (R) 2015 (Dentistry - Biocompatibility Assessment).
Technical data:
Density: 1.4 - 1.5 g / cm3
Viscosity: 2500 - 6000 MPa * s
Bending strength (after hardening) 2,3,4: ≥ 100MPa
Package:
- 1l
Formlabs resin Denture Base 1L - Resin for denture plates
Biocompatible resin for printing full dentures. Perfectly fitted dentures faster and cheaper. Long-term, biocompatible class IIa resins enable dentists and technicians to manufacture full dentures using 3D printing technology.
Denture Base resin has been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:
- Not mutagenic.
- Non-cytotoxic.
- It does not cause erythema or edema reactions.
- It is not allergenic.
- Does not cause systemic toxicity.
ISO standards for Denture Base: - EN-ISO 20795-1: 2013 (Dentistry - Base Polymers - Part 1: Denture Base Polymers)
Colors:
- LT (Light Pink)
- OP (Original Pink)
- RP (Reddish Pink)
DP (Dark Pink)
Supported layer height: 50 micrometers.
- Curing required.
Package:
- 1l
Formlabs resin Denture Teeth 1L
Denture Base and Teeth resins have been tested and approved for use by: WuXi Apptec, 2540 Executive Drive, St. Paul, MN. The resins have received the biocompatibility class confirmed by the standards: EN-ISO 10993-1: 2009 / AC: 2010:
• Non-mutagenic. • Non-cytotoxic. • Does not cause erythematous or edema reactions. • Not sensitizing. • Does not cause systemic toxicity.
ISO standards for Denture Teeth:
• EN-ISO 22112: 2017 (Dentistry - artificial teeth for dentures) • Flexural strength, water absorption and water solubility in accordance with EN-ISO 10477 (Dentistry - Polymer-based crowns and veneering materials) type 2 class 2
Color:
- A1
- A2
- A3
- A3.5
- B1
- B2
Package:
- 1l
Formlabs Permanent Crown resin 1L
Permanent Crown resin is a dental, biocompatible material for 3D printing in SLA technology. The material in the natural color of tooth enamel is suitable for the production of permanent, full-contour prosthetic restorations. Permanent Crown resin is a hybrid material with a ceramic filling. The prints have a perfect fit, low water absorption and a smooth finish. Crowns made of this material have a low tendency to age, discolor or build up plaque. Permanent Crown resin is available in 4 VITA shades (A2, A3, B1, C2).
Application:
- Permanent single crowns.
- Cartridges.
- Inputs.
- Veneers.
Resin is a medical device as defined in the EU Medical Devices Directive (93/42/EEC) and Chapter 201(h) of the Federal Food Drug & Cosmetic (FD&C) Act. Restorations printed with temporary CB resin have been assessed according to ISO 10993-1:2018 (Part 1: Assessment and testing as part of the risk management process) and ISO 7405:2009/(R)2015 (Dentistry - biocompatibility assessment).
- Printing on a stainless steel build plate
Packaging:
- 1 liter