Product Code: 495
Qty: 1
Formlabs resin for 3D printer Durable 1L
Formlabs

158.96€ +vat217.24€

195.52€ incl tax

Formlabs resin for 3D printer Durable 1L

Durable resin (v2) simulating the properties of polypropylene (PP) is intended for products exposed to friction and wear. Thanks to its low modulus, high elongation and high impact strength, Durable resin prints are smooth, shiny and have good deformation strength. Use this material for applications that require minimal friction.

Packaging:

  • 1000 ml

Product Code: 495
Brands Formlabs
Formlabs resin for 3D printer Durable 1L

158.96€ +vat217.24€

195.52€ incl tax

Product Code: 1033
Qty: 3
Stratogel 3D - Insulator for 100ml 3D models
Protechno

40.09€ +vat

49.32€ incl tax

Stratogel 3D - Insulator for 100ml 3D models

Gel, despite its stickiness, spreads easily over the surface and forms a thin layer after drying. STRATOGEL acts as a separating film between the 3D resin and acrylic resin. The product has the right viscosity, effective with just one layer. However, a second layer can be applied when dealing with rougher surfaces (printed models larger than 100 microns). The first layer must be completely dry. The plastic layer is easily removed with water and a brush. STRATOGEL comes off without residue, does not damage acrylic and 3D resin, does not change the properties of resins. It is safe and does not contain any toxic substances.

Benefits:

  • Easy application: a single layer is applied with a brush.
  • Creates a very thin insulating layer.
  • Does not contaminate 3D resin or acrylics.
  • Easily removable with water.

Directions for use:

  • Apply a few drops directly from the bottle to the dry model and spread it evenly with a brush.
  • For quick drying, it is recommended to dry the gel with compressed air at low pressure for 30 seconds, air drying for 30 minutes.

Package:

  • 100 ml

Product Code: 1033
Brands Protechno
Stratogel 3D - Insulator for 100ml 3D models

40.09€ +vat

49.32€ incl tax

Product Code: 1164
Qty: 2-3 Days
3D SIMPLEX Renfert-Filament printer
Renfert

3,151.56€ +vat

3,876.42€ incl tax

3D SIMPLEX Renfert-Filament printer

SIMPLEX is a dental 3D filament printer. With Slicer software, which was developed specifically for the dental industry, you can print models easily and reliably thanks to the "Plug and Print" concept. The SIMPLEX 3D-filament-printer system covers the entire scope of producing orthodontic models. Thanks to high dimensional accuracy, the SIMPLEX 3D filament printer provides consistent and repeatable results. The produced 3D models do not require post-processing.

Advantages:

  • Easy to use thanks to the "Plug and Print" concept.
  • Level resolution of up to 50 µm ensures precise results.
  • Pleasant operation with low noise level ≤ 49 dB.

Details:

  • Process reliability thanks to fiber monitoring system and automated troubleshooting.
  • Intuitive navigation on the touch screen.
  • Safety thanks to a closed compartment, lockable door and removable cover.
  • Heated work table: optimal grip and easy cleaning.
  • Simple operation thanks to the removable printing platform.
  • Optimal communication between computer and printer via Wi-Fi (currently EU and USA).
  • Working with fibers that are harmless to health.

Packaging:

  • 1 piece

Product Code: 1164
Brands Renfert
3D SIMPLEX Renfert-Filament printer

3,151.56€ +vat

3,876.42€ incl tax

Product Code: 1763
Qty: Out Of Stock
Detax resin Freeprint crown A1 500g
Detax

407.78€ +vat

440.40€ incl tax

Detax resin Freeprint crown A1 500g

Light-cured resin, with ceramic filling for 3D printing. For the production of permanent crowns, inlays, onlays, veneers, prosthetic teeth and long-term temporary crowns and bridges. For DLP printers with a wavelength of 385 nm. Does not contain MMA and THF-MA. Class IIa medical device.

Advantages:

  • Very high resistance to breakage and abrasion.
  • Natural translucency and opaqueness.
  • Easy to grind and polish.
  • High biocompatibility.
  • No discoloration thanks to low water absorption.
  • Long-term color stability.
  • Excellent bond with classic dental cements.

Physical data:

  • Bending strength > 115 MPa.
  • Elastic modulus > 2800 MPa.
  • Final hardness > 50 Barcol.
  • Water absorption at 40 g/mm3.
  • Solubility 7.5 g/mm3.

Packaging:

  • 500g

Product Code: 1763
Brands Detax
Detax resin Freeprint crown A1 500g

407.78€ +vat

440.40€ incl tax

Product Code: 1827
Qty: 3
Dreve Phrozen Sonic XL 4K printer
Dreve

3,058.32€ +vat4,702.17€

3,761.73€ incl tax

Dreve Phrozen Sonic XL 4K printer

Phrozen Sonic XL 4K 2022

Compact LCD desktop printer with 52 µ accuracy and high light intensity for fast printing times. The high-quality all-metal housing, heated workspace and easy handling of the cuvette make the Phrozen Sonic XL a user-friendly 3D printer for all dental applications.

Red colour .

Phrozen Sonic XL 4K 2022 printer optimized by Dreve specialists for printing precise dental models. You can print them quickly and conveniently on a large-format construction board. The 3D printer is supplied with Dreve ElementS software, which facilitates the user's work thanks to a friendly interface.

The Phrozen Sonic XL 4K printer, version 2022, is delivered to the user fully calibrated and ready for operation, all that is required is to connect it and you can start printing (plug & play).

We offer professional technical and substantive support.

Sonic XL 4K 2022 is also equipped with a heating and air purification system to improve the printing process.

Characteristics:

  • Print volume: 200 x 125 x 200 mm

  • 4K resolution

  • The LCD display offers incredible ultra-high resolution printing of 3840 x 2160 with 52 µm XY resolution.

  • 9.3 inch printing area;

  • With a 9.3-inch LCD printing area, the Sonic XL 4K 2022 display is much larger than traditional LCD printers.

  • Monochrome LCD screen

  • Sonic XL 4K 2022 prints up to five times faster than conventional 3D printers, and it only takes about a second to print a layer.

  • Solid construction

  • The 3D printer is made of aluminum and is designed for a precise, quiet and smooth printing process.

  • Large touch screen

  • Printing status can be monitored at all times and the printer can be easily managed via the 5-inch touchscreen.

  • 12-month warranty. The exception is the LCD screen as a wearing part. There is a 3-month warranty here.

Packaging:

  • 1 piece.

Product Code: 1827
Brands Dreve
Dreve Phrozen Sonic XL 4K printer

3,058.32€ +vat4,702.17€

3,761.73€ incl tax

Product Code: 1831
Qty: 4
Dreve Resin vat for Phrozen Sonic XL4k
Dreve

224.71€ +vat

276.39€ incl tax

Dreve Resin vat for Phrozen Sonic XL4k

Resin bathtub.

Packaging:

  • 1 piece.

Product Code: 1831
Brands Dreve
Dreve Resin vat for Phrozen Sonic XL4k

224.71€ +vat

276.39€ incl tax

Product Code: 1832
Qty: 9
Dreve FEP foil for Resin vat
Dreve

19.02€ +vat

23.40€ incl tax

Dreve FEP foil for Resin vat

FEP blank

Packaging:

  • 1 piece

Product Code: 1832
Brands Dreve
Dreve FEP foil for Resin vat

19.02€ +vat

23.40€ incl tax

Product Code: 1846
Qty: 3
Dreve FotoDent biobased model 385nm beige opaq 1kg
Dreve

147.36€ +vat201.39€

181.25€ incl tax

Dreve FotoDent biobased model 385nm beige opaq 1kg

Model BioDent® 385 nm

The BioDent® model is a light-curing resin consisting of 50% renewable raw materials. The properties of the material are ideal for the production of models (also in Aligner). The FotoDent® bio-based model can be cleaned using the FotoClean program.

Advantages:

  • less pollution in the atmosphere
  • free of carcinogenic materials
  • shorter cleaning times

Material data:

  • Color beige opaque
  • Modulus of elasticity ≥ 2200 MPa
  • Viscosity ~ 0.6 Pa · s
  • Bending strength ≥ 95 MPa

Packaging:

  • 1 kg bottle.

Product Code: 1846
Brands Dreve
Dreve FotoDent biobased model 385nm beige opaq 1kg

147.36€ +vat201.39€

181.25€ incl tax

Product Code: 1901
Qty: 7
Dental Model V3 1L resin for Formlabs 3D printer
Formlabs

122.52€ +vat167.44€

150.70€ incl tax

Dental Model V3 1L resin for Formlabs 3D printer

Designed for crown and bridge models with replaceable dies. Dental Model Resin is a very precise resin with high accuracy.

Version 3:

  • This version of Model Resin is a reformulation of the previous version.
  • With the new V3 resin, you can print even more accurate models in half the time.
  • Supports print resolutions: 100 and 50 microns.
  • Requires Form 3 Resin Tank V2.1 or later for Form 3B and Form 2 Resin Tank LT for Form 2.

Packaging:

  • 1l

Product Code: 1901
Brands Formlabs
Dental Model V3 1L resin for Formlabs 3D printer

122.52€ +vat167.44€

150.70€ incl tax

Product Code: 1985
Qty: 61
Simplex model isolation 80g
Renfert

23.31€ +vat

28.67€ incl tax

Simplex model isolation 80g

SIMPLEX model isolation, Isolator for 3D printed models from resins and filaments.

Renfert catalog number 17350010

Thanks to the ready-to-use agent, you can easily and safely make orthodontic appliances from dental resin on a printed model. Apply a thin layer of the agent using a brush. Once dry, this layer creates a clear insulation between the printed model and the dental acrylic.

Advantages:

  • Suitable for use with models printed from 3D filament and resin.
  • Intended for isolating models in the production of removable orthodontic appliances.
  • Also suitable for models made using the SLA/DLP printing process.
  • One application is enough to achieve optimal separation of the model from the workpiece.
  • The agent can be easily removed with water and does not require steam cleaning.
  • It does not contain substances harmful to health.

Packaging:

  • 1pc/80g

Product Code: 1985
Brands Renfert
Simplex model isolation 80g

23.31€ +vat

28.67€ incl tax

Product Code: 2273
Qty: 1
Dreve FotoDent Denture pink transparent 385 nm1kg
Dreve

297.23€ +vat356.68€

321.01€ incl tax

Dreve FotoDent Denture pink transparent 385 nm1kg

Light-curing resin for the production of denture bases. The material provides accurate results with exceptional dimensional stability. The FotoDent® prosthesis is MMA free and has a stable color.

Material data:

  • Final hardness 80 Shore D.
  • Modulus of elasticity> 2000 MPa
  • Bending strength> 80 MPa
  • Viscosity 0.4-0.6 Pa · s
  • Pink transparent color.

Packaging:

  • 1 kg

Product Code: 2273
Brands Dreve
Dreve FotoDent Denture pink transparent 385 nm1kg

297.23€ +vat356.68€

321.01€ incl tax

Product Code: 2455
Qty: 23
Anycubic EcoPrint 3D printer + starter kit
Ecoprint

1,118.90€ +vat

1,376.24€ incl tax

Anycubic EcoPrint 3D printer + starter kit

Thanks to our many years of experience and cooperation with leading manufacturers of solutions for dental prosthetics, we have developed a new product for you:

EcoPrint: a system for economical printing of prosthetic models thanks to which:

  • You can print 6 models in up to 30 minutes.
  • You will achieve printing precision in 12K resolution.
  • You will optimize the costs of your business - the cost of printing a model is approximately PLN 6.
  • You will have the opportunity to print skeletal dentures.

The system includes:

  • Reconfigured printer - before delivery to your studio, each EcoPrint printer is reconfigured to meet the highest quality standards set for printers for precise prosthetic models.

  • Wash&Cure 2.0 washing and polymerization device - thanks to the use of this device, you can be sure that the printed models will undergo the appropriate post-processing procedure.

  • 2 kg of resin for EcoPrint Craftsman DLP models (beige color) - this is the resin we chose due to its unrivaled parameters (accuracy, sharp contours, printing speed).

  • Work accessories - everything you need to print your models right after receiving the EcoPrint set (cuvette, strainer for pouring resin, tweezers, masks, LCD thermometer/hygrometer)

  • Free implementation of the system in your studio/office - our consultant is waiting for your call, implementation will take only 30-45 minutes and thanks to it you will avoid failures and ensure excellent results already in the first prints. Dental tech. Patryk Baszuk will be happy to answer all your questions and help you run the EcoPrint system, patryk.baszuk@mikran.com tel. 798 748 738

  • Free after-sales support during the warranty period.

  • Post-warranty service.

  • Voucher for a free design of a frame denture in Exocad (we will design a frame denture for you free of charge and you can print and cast it)

  • 10% discount on Exocad courses offered by our Digital Training Laboratory.

EcoPrint advantages:

  • Low system price.
  • Very low operating costs (approx. PLN 6 for the model).
  • You will achieve printing precision in 12K resolution.
  • High repeatability of results.
  • Professional implementation and after-sales support.

Packaging:

  • EcoPrint 3D printer + starter kit.

Product Code: 2455
Brands Ecoprint
Anycubic EcoPrint 3D printer + starter kit

1,118.90€ +vat

1,376.24€ incl tax

Product Code: 2814
Qty: Out Of Stock
Detax resin Freeprint Splintmaster taff 1000g
Detax

329.20€ +vat

355.53€ incl tax

Detax resin Freeprint Splintmaster taff 1000g

Light-curing, flexible resin for 3D printing. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

  • Very high wearing comfort.
  • No stress.
  • Long-lasting durability and stability.
  • High impact resistance.
  • Easy to maintain, clean and polish.
  • No MMA, THF-MA and TPO.
  • Odor and taste neutrality.

Physical data:

  • Tensile strength > 40 MPa.
  • Elongation > 20%.
  • Tear strength > 140 N/mm.
  • Final hardness > 75 Shore D.
  • Water absorption < 32 µg/mm³.
  • Solubility < 5 µg/mm³.

Packaging:

  • 1000g

Product Code: 2814
Brands Detax
Detax resin Freeprint Splintmaster taff 1000g

329.20€ +vat

355.53€ incl tax

Product Code: 2887
Qty: Out Of Stock
Detax resin Freeprint Splintmaster flex 1000g
Detax

350.43€ +vat

378.47€ incl tax

Detax resin Freeprint Splintmaster flex 1000g

Light-curing, very flexible 3D printing resin. For making flexible splints, repositioners, mouth guards, splints and bite plates. Biocompatible. For DLP printers with a wavelength of 385 nm. Class IIa medical device.

Advantages:

  • Very high wearing comfort.
  • No stress.
  • Long-lasting durability and stability.
  • High impact resistance.
  • Easy to maintain, clean and polish.
  • No MMA, THF-MA and TPO.
  • Odor and taste neutrality.

Physical data:

  • Tensile strength > 25 MPa.
  • Elongation > 50%.
  • Tear strength > 110 N/mm.
  • Final hardness > 65 Shore D.
  • Water absorption < 32 µg/mm³.
  • Solubility < 5 µg/mm³.

Packaging:

  • 1000g

Product Code: 2887
Brands Detax
Detax resin Freeprint Splintmaster flex 1000g

350.43€ +vat

378.47€ incl tax

Product Code: 2955
Qty: 4
Detax resin Freeprint temp 500g
Detax

261.02€ +vat

281.90€ incl tax

Detax resin Freeprint temp 500g

Light-curing, biocompatible resin for printing temporary crowns and bridges.

Advantages:

  • Light spectrum 385 nm.
    • Exceptional resistance to cracking and bending.
    • High abrasion resistance.
    • Natural tooth aesthetics, shiny, translucent colors.
    • Easy surface treatment and polishing, which can be characterized individually with composites.
    • Low viscosity ensures low material consumption and faster cleaning.
    • Resistant to conditions in the oral cavity, no odor and taste irritation.
    • Class IIa medical device.
    • Colours: A1, A2, A3.

Packaging:

  • 500g

Product Code: 2955
Brands Detax
Detax resin Freeprint temp 500g

261.02€ +vat

281.90€ incl tax

Product Code: 2958
Qty: 3
Detax resin Freeprint splint 2.0 500g
Detax

219.82€ +vat

237.40€ incl tax

Detax resin Freeprint splint 2.0 500g

Light-curing, biocompatible resin for 3D printing, for the production of implant guides, transfer keys and occlusal splints.

Advantages:

  • Light spectrum 385 nm.
  • Transparent formula for visual control in the workspace.
  • Process reliability due to high initial hardness and final strength.
  • Low viscosity ensures low material consumption and faster cleaning.
  • The highest mechanical resistance to bending and cracking.
  • Odor and taste neutral.
  • Class IIa medical device,
  • Colour: transparent.

Packaging:

  • 500g

Product Code: 2958
Brands Detax
Detax resin Freeprint splint 2.0 500g

219.82€ +vat

237.40€ incl tax

Product Code: 2975
Qty: 3
Detax resin Freeprint model 2.0 1000g
Detax

263.87€ +vat

324.57€ incl tax

Detax resin Freeprint model 2.0 1000g

Light-curing resin for 3D printing for dental models.

Advantages:

  • For DLP printers with a wavelength of 385 nm.
  • Maximum surface hardness and dimensional stability ensure excellent mechanical load capacity.
  • Faster workflow without drying process.
  • Maximum design precision, feel and stability meet the high demands of model production.
  • Optimum edge strength ensures reliable models.
  • Colors: sand, light grey, caramel, white.

Physical data:

  • Flexural strength > 80 MPa;
  • Elastic modulus > 1700 MPa;
  • Final hardness > 80 Shore D.

Packaging:

  • 1000g

Product Code: 2975
Brands Detax
Detax resin Freeprint model 2.0 1000g

263.87€ +vat

324.57€ incl tax

Product Code: 3010
Qty: 3
Detax resin Freeprint cast 2.0 500g
Detax

220.05€ +vat

270.66€ incl tax

Detax resin Freeprint cast 2.0 500g

Light-curing 3D resin for the production of precise casting objects (skeletons).

Advantages:

  • For all UV printers with a light spectrum of 385 nm.
  • Excellent dimensional stability after printing ensures secure application with fit control, especially for cast models and moulds.
  • Print results are precise and distortion-free, even with extremely delicate and complex models.
  • Any post-print corrections or repairs are possible with easyform gel LC.
  • Low viscosity and optimized depth of cure help reduce printing time and material consumption, and facilitate faster cleanup.
  • It burns without leaving any residue in the mold and is the basis for high-quality modeling results that ensure a perfect fit.
  • Red colour

Packaging:

  • 500g

Product Code: 3010
Brands Detax
Detax resin Freeprint cast 2.0 500g

220.05€ +vat

270.66€ incl tax

Product Code: 3531
Qty: 11
Anycubic EcoPrint Screen Protector 5 pcs.
Ecoprint

23.31€ +vat

28.67€ incl tax

Anycubic EcoPrint Screen Protector 5 pcs.

EcoPrint printer cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

  • 5 pcs

Product Code: 3531
Brands Ecoprint
Anycubic EcoPrint Screen Protector 5 pcs.

23.31€ +vat

28.67€ incl tax

Product Code: 3544
Qty: 54
Anycubic EcoPrint foil for resin tank 1 pc.
Ecoprint

16.60€ +vat

20.41€ incl tax

Anycubic EcoPrint foil for resin tank 1 pc.

Resin tank foil for Anycubic EcoPrint.

Characteristics:

  • Size 278 x 190mm.
  • Thickness 0.3mm.
  • Permeability 92%.
  • ACF foil type.

Advantages:

  • Suitable for fast printing.

Attention:

  • The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
  • The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

  • 1 piece

Product Code: 3544
Brands Ecoprint
Anycubic EcoPrint foil for resin tank 1 pc.

16.60€ +vat

20.41€ incl tax

Product Code: 3545
Qty: 11
Anycubic Eco Print foil for resin tank 2 pcs.
Ecoprint

31.52€ +vat

38.76€ incl tax

Anycubic Eco Print foil for resin tank 2 pcs.

Resin tank foil for Anycubic EcoPrint.

Characteristics:

  • Size 278 x 190mm.
  • Thickness 0.3mm.
  • Permeability 92%.
  • ACF foil type.

Advantages:

  • Suitable for fast printing.

Attention:

  • The foil is a consumable part and must be replaced if it is deformed or damaged during printing.
  • The foil should be replaced immediately if any signs of deformation or excessive adhesion occur.

Packaging:

  • 2 pcs

Product Code: 3545
Brands Ecoprint
Anycubic Eco Print foil for resin tank 2 pcs.

31.52€ +vat

38.76€ incl tax

Product Code: 4262
Qty: 2
Formlabs resin for the BioMed Durable 1L 3D printer
Formlabs

389.67€ +vat532.55€

479.29€ incl tax

Formlabs resin for the BioMed Durable 1L 3D printer

BioMed Durable Resin is a transparent material for biocompatible applications requiring impact, shatter and abrasion resistance.

This USP Class VI material is manufactured in an FDA, ISO 13485 registered facility and can be used in long term skin contact and short term tissue, bone and dentine contact applications.

Resin dedicated to 3D printers from the Form 3B series. is compatible with the Form 3B, Form 3B+ and Form 3BL models and can be used in medical facilities for the production of devices and instrumentation as well as in dental and orthodontic laboratories.

In order for physicians and manufacturers to rely on this new material in contact with patients, Formlabs strictly followed USP Class VI procedures to be certified for use in long-term skin applications (greater than 30 days) and short-term contact with tissue, bone and dentin (less than 24 hours). The Formlabs manufacturing facility is ISO 13485 compliant and strict quality control measures are rigorously adhered to.

Technical data:

  • The highest tensile strength - 29.1 MPa.
  • Modulus of elasticity - .99 GPa.
  • Elongation at break - 33%
  • Impact resistance (Notched Izod) - 98 J/m.

Packaging:

  • 1 liter

Product Code: 4262
Brands Formlabs
Formlabs resin for the BioMed Durable 1L 3D printer

389.67€ +vat532.55€

479.29€ incl tax

Product Code: 4659
Qty: 12
AnyCubic Wash & Cure Plus Machine (washer / lamp)
Anycubic

177.37€ +vat256.67€

218.17€ incl tax

AnyCubic Wash & Cure Plus Machine (washer / lamp)

Ultrasonic cleaner and UV lamp for printed models.

Technical Specifications;

  • Control method: digital tube, LED indicator, control knob
  • Rated power: 40W
  • Input voltage: AC110 / 240V 50 / 60Hz
  • UV light length: 405nm
  • Time selection: 1-60 min
  • Machine Size: 290mm (L) * 270mm (W) * 479mm (H)
  • Washing Basket Size: 192mm (L) * 120mm (W) * 290mm (H)
  • Maximum size of object to be cured: 190mm (D) * 245mm (H)
  • Libra; ~ 6.5 kg

Package:

  • 1 piece

Product Code: 4659
Brands Anycubic
AnyCubic Wash & Cure Plus Machine (washer / lamp)

177.37€ +vat256.67€

218.17€ incl tax

Product Code: 4958
Qty: 1
AnyCubic screen protector for Photo Mono X 6K 5 pcs.
Anycubic

23.31€ +vat

28.67€ incl tax

AnyCubic screen protector for Photo Mono X 6K 5 pcs.

A cover mounted on the LCD screen to protect against spilled resin and mechanical damage. Thanks to this, scratches, cracks and other damage will not appear on the screen. The cover has high light transmittance, so the prints are precise and accurate.

Packaging:

  • 5 pcs

Product Code: 4958
Brands Anycubic
AnyCubic screen protector for Photo Mono X 6K 5 pcs.

23.31€ +vat

28.67€ incl tax

Product Code: 5241
Qty: 29
Resin tray 25x35x5cm
Ikea

1.49€ +vat

1.83€ incl tax

Resin tray 25x35x5cm

Resin tray 25x35x5cm.

Packaging:

  • 1 piece

Product Code: 5241
Brands Ikea
Resin tray 25x35x5cm

1.49€ +vat

1.83€ incl tax

Product Code: 5242
Qty: 42
Resin strainer
Mikran.Pl

14.73€ +vat

18.12€ incl tax

Resin strainer

Convenient strainer for draining the remaining resin after printing.

Packaging:

  • 1 piece.

Product Code: 5242
Brands Mikran.Pl
Resin strainer

14.73€ +vat

18.12€ incl tax

Product Code: 5390
Qty: 33
Thermometer Hygrometer LCD
Mikran.Pl

9.32€ +vat

11.47€ incl tax

Thermometer Hygrometer LCD

Thermometer and humidity sensor.

Thanks to this device, it is possible to measure the environmental conditions in which e.g. resin for 3D printers and many other materials sensitive to humidity and temperature are stored and used.

Technical data:

  • Product type: Temperature and humidity sensor.
  • Connectivity: Bluetooth 4.2 LE.
  • Power: CR2032 battery.
  • Rated voltage: 2.5V - 3V.
  • Humidity range: 0%~99%RH.
  • Temperature range: 0ºC ~ 60ºC.
  • Material: ABS, PMMA.
  • Certifications: QB/WSDJ 2401-2019.
  • White color.
  • Dimensions: 43x43x12.5mm.
  • Additional information: Temperature display every 0.1ºC, Humidity display every 1% RH

Packaging:

  • 1 piece

Product Code: 5390
Brands Mikran.Pl
Thermometer Hygrometer LCD

9.32€ +vat

11.47€ incl tax

Product Code: 7281
Qty: 2-3 Days
Simplex multi-use model 800g
Renfert

77.39€ +vat

95.19€ incl tax

Simplex multi-use model 800g

The multi-purpose SIMPLEX filament provides a natural surface effect due to the high content of hard plaster. Offers a high level of detail. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. It can be easily processed with rotary instruments or a scalpel. Printing temperature: 205-220 ° C

Data:

  • Gypsum fiber Ø 1.75 mm
  • 1 x 800 g
  • White color

Product Code: 7281
Brands Renfert
Simplex multi-use model 800g

77.39€ +vat

95.19€ incl tax

Product Code: 7582
Qty: 2-3 Days
Simplex aligner model 800g
Renfert

59.67€ +vat

73.40€ incl tax

Simplex aligner model 800g

The special SIMPLEX aligner filament is tailored to the special requirements of aligner production and the thermoforming technique. It is conducive to pleasant work because it does not contain irritating ingredients. It does not emit unpleasant fumes during the printing process. No finishing, no annealing. Printing temperature: 235-255 ° C

Details:

  • Heat-resistant special filament Ø 1.75 mm,
  • 1 x 800 g
  • White color

Package:

  • 1 piece

Product Code: 7582
Brands Renfert
Simplex aligner model 800g

59.67€ +vat

73.40€ incl tax

Product Code: 7704
Qty: 2-3 Days
Simplex working model 800 g
Renfert

27.79€ +vat

34.18€ incl tax

Simplex working model 800 g

  • The SIMPLEX filament for working models provides high detail.
  • It is conducive to pleasant work because it does not contain irritating ingredients.
  • Does not produce unpleasant fumes during the printing process,
  • Suitable for recycling and industrial composting.
  • Printing temperature: 190-230 ° C

Details:

  • Biofilament Ø 1.75 mm,
  • 1 x 800 g,
  • green color

Product Code: 7704
Brands Renfert
Simplex working model 800 g

27.79€ +vat

34.18€ incl tax

Product Code: 7802
Qty: 2-3 Days
Simplex study model 800g
Renfert

27.79€ +vat

34.18€ incl tax

Simplex study model 800g

The filament for the demonstration model made of SIMPLEX biofibers offers a high level of detail and sharpness of diagnostic models. It is conducive to pleasant work because it does not contain irritating ingredients. It does not produce unpleasant fumes during the printing process, is suitable for recycling and industrial composting. Printing temperature: 190-230 ° C

Details:

  • Biofilament Ø 1.75 mm,
  • 1 x 800 g,
  • White color

Package:

  • 1 piece

Product Code: 7802
Brands Renfert
Simplex study model 800g

27.79€ +vat

34.18€ incl tax

Product Code: 8042
Qty: 14
Resione 3D resin F80 Gingival-like 0.5kg
Resione

58.74€ +vat80.28€

72.25€ incl tax

Resione 3D resin F80 Gingival-like 0.5kg

F80 is a soft and flexible resin, pink in color, particularly suitable for creating models of dental gums. F80 resin can maintain its softness even at lower temperatures.

Advantages:

  • F80 resin prints have a Shore hardness of 50-60A, are soft to the touch and flexible.
  • F80 resin prints are characterized by good elasticity and quickly regain their shape after deformation.
  • Even at temperatures below 10°C, F80 prints remain soft, although their flexibility decreases as the temperature drops.
  • F80 resin is suitable for all popular LCD/MSLA/DLP 3D printers on the market, including RGB or monochrome printers.
  • Printer Compatibility - All series of Anycubic, Asiga, Solus, Miicraft, Kudo3d, Flashforge, Makex, Shining etc. 385-410nm DLP UV resin 3D printer.

Mechanical properties:

  • ASTM Shore Hardness: D2240-05 50-60A.
  • Tensile strength ASTM: D638-14 3.8 MPa.
  • Tear strength ASTM: D624-98 9.75 KN/m.
  • Elongation at break ASTM: D638-14 159%.
  • Viscosity (25℃) ASTM: D4212-10 2300mpa.s.

Manufacturer's recommendations:

  • If the resin will not be used in the 3D printer for more than 1 day, it is recommended to filter the resin using a funnel with a filter and pour it into an empty container. Do not pour the resin from the tank back into the original bottle to avoid contamination with other resins.

Packaging:

  • 500g

Product Code: 8042
Brands Resione
Resione 3D resin F80 Gingival-like 0.5kg

58.74€ +vat80.28€

72.25€ incl tax

Product Code: 11617
Qty: 2
Formlabs Form 3B+ 3D printer
Formlabs

4,382.35€ +vat

5,390.29€ incl tax

Formlabs Form 3B+ 3D printer

Dental 3D printer for orthodontics, prosthetics and implantology.

Printing technology:

  • Low Force Stereolithography™ (LFS).
  • Working area 145 × 145 × 185 mm.
  • Layer height 25 – 300 microns.
  • Laser spot size 85 micrometers.

The Formlabs Form 3B+ 3D printer was created specifically for dental applications. High printing precision was achieved thanks to the use of an improved version of stereolithography (SLA). The laser spot is only 0.085 mm, which gives ultra-precise dimensional accuracy. LFS technology enables fast, efficient and reliable manufacturing with a precision of 25 micrometers. This is confirmed by the reputation of Formlabs devices. The availability of 20 materials for 3D printing, including dental and biocompatible materials, translates into wide use in orthodontics, implantology and prosthetics. An improved optical system, updated 3D printer software and new components make the latest version of the Form 3B+ 3D printer guarantee even greater reliability, precision and speed of 3D printing.

Advantages:

  • The Form 3B+ 3D printer is compatible with PreForm software, Formlabs dental resins and post-processing devices: Form Wash and Form Cure.
  • Convenience of use, easy and clean operation, thanks to replaceable 1-liter material cartridges. Upload designs for printing via Wi-Fi, USB or Ethernet.
  • Technical support, you can count on our help at the stage of choosing a 3D printer, as well as after the purchase. We provide professional training, technical support and post-warranty care.

Technical data:

  • Working area: 145 x 145 x 185 mm
  • Materials: Standard, Castable Wax, Denture Base and Teeth, Dental Model, Dental SG, Dental LT Clear
  • Laser spot diameter: 85 micrometers
  • Laser power: 250 kW
  • Software: Preform
  • Layer height: 25-300 micrometers
  • Dimensions: 405 x 375 x 530 mm
  • Weight: 17.5 kg

Packaging:

  • 1 piece

Product Code: 11617
Brands Formlabs
Formlabs Form 3B+ 3D printer

4,382.35€ +vat

5,390.29€ incl tax

Product Code: 11977
Qty: Out Of Stock
Formlabs Form 3 B printer - Dental version SPECIAL OFFER
Formlabs

3,971.50€ +vat5,746.99€

4,884.94€ incl tax

Formlabs Form 3 B printer - Dental version SPECIAL OFFER

Impressive precision with every print, version B with a full license for professional dental resins.

Formlabs has developed a new version of the SLA technology to achieve even better results in printing with photopolymer resins. Formlabs Form 3 3D printer uses LFS (Low Force Stereolithography) technology, which ensures even higher precision of production with increased printing speed. Thanks to the reduced laser spot to 85 micrometers, we can achieve unrivaled accuracy of mapping each detail. In turn, built-in sensors monitor the operation of the device and maintain constant conditions during printing, which guarantees repeatability of production. Get the unparalleled precision of 3D printing in even less time.

printing technology:

Low Force Stereolithography (LFS)

working area:

145 × 145 × 185 mm

layer height:

25 - 300 microns

laser spot size:

85 microns

Smooth surface of prints The support structures are even thinner, so that the models have a smooth surface. Easier removal of supports also means shorter processing time of prints.

More accurate representation of details The improved optical system controls a laser beam with a size of 85 micrometers. This ensures exceptional precision and quality of detail reproduction.

SLA technology in a new edition Developed by Formlabs LFS (Low Force Stereolithography) technology allows you to print with much greater precision compared to other SLA 3D printers.

Complete ecosystem The Form 3 3D printer is compatible with PreForm software, Formlabs resins, the worktable used in Form 2, and the Form Wash and Form Cure post-processing equipment.

Convenient file transfer Upload print projects via Wi-Fi, USB or Ethernet. Manage your prints conveniently on the 5.5 inch touch screen.

Technical support You can count on our help at the stage of choosing a 3D printer, as well as after the purchase. We provide professional training, technical support and post-warranty care.

Product Code: 11977
Brands Formlabs
Formlabs Form 3 B printer - Dental version SPECIAL OFFER

3,971.50€ +vat5,746.99€

4,884.94€ incl tax

Product Code: 13453
Qty: Out Of Stock
Formlabs resin for the 3D printer Dental Model V2 1l
Formlabs

122.62€ +vat167.58€

150.82€ incl tax

Formlabs resin for the 3D printer Dental Model V2 1l

Designed for printing models of crowns and bridges with replaceable dies, Dental Model V2 is a resin with high precision and accuracy. Print the finest details down to 35 microns and removable stencils with a consistent fit. The smooth, matte surface finish and plaster-like color make it easy to switch from analog to digital model production.

Packaging:

  • 1 liter

Product Code: 13453
Brands Formlabs
Formlabs resin for the 3D printer Dental Model V2 1l

122.62€ +vat167.58€

150.82€ incl tax

Product Code: 13461
Qty: 13
Surgical Guide SG 1L resin for Formlabs 3D printer
Formlabs

226.17€ +vat271.41€

244.27€ incl tax

Surgical Guide SG 1L resin for Formlabs 3D printer

A resin with first class biocompatibility, intended for dentists to create precise surgical templates. Prints made of this material can be sterilized in an autoclave and are allowed to come into contact with skin and tissues. The material was created and rigorously tested to print precise templates and guides used in implant procedures. After final processing, prints made of this material can become fully transparent for better positioning.

Recommended printing on a layer of 100 or 50 micrometers (Form 2) and 100 micrometers (Form 3B).

Meets ISO standards:

  • EN ISO 10993-5:2009 (non-cytotoxic)
  • ISO 10993-10:2010/(R)2014 (non-sensitizing)
  • ISO 10993-10:2010/(R)2014 (non-irritating)
  • EN ISO 13485:2016
  • EN ISO 14971:2012

Packaging:

  • 1 liter

Product Code: 13461
Brands Formlabs
Surgical Guide SG 1L resin for Formlabs 3D printer

226.17€ +vat271.41€

244.27€ incl tax

Product Code: 13462
Qty: Out Of Stock
Dental LT ClearV2 1L resin for Formlabs 3D printer
Formlabs

317.00€ +vat380.40€

342.36€ incl tax

Dental LT ClearV2 1L resin for Formlabs 3D printer

Class IIa biocompatible resin with high peel and wear resistance, making Dental LT Clear ideal for splints, attachments and other direct orthodontic devices. Thanks to the transparent color, high optical transparency is achieved for beautiful final products.

  • The material has been assessed according to ISO 10993-1:2018.

Application:

  • Occlusal splints.
  • Retention appliances.
  • Occlusal overlays.
  • Surgical splints and guides.
  • Fastening elements.
  • Other orthodontic accessories.

Material properties:

  • Bending modulus 2300 MPa.
  • Elongation at break 12%.
  • Shore hardness: 78D.
  • Color transparent.

Packaging:

  • 1 liter

Product Code: 13462
Brands Formlabs
Dental LT ClearV2 1L resin for Formlabs 3D printer

317.00€ +vat380.40€

342.36€ incl tax

Product Code: 13527
Qty: 1
Formlabs Form Wash - a device for cleaning models after printing
Formlabs

604.58€ +vat

743.63€ incl tax

Formlabs Form Wash - a device for cleaning models after printing

Form Wash, a washer for cleaning models from resin residues.

  • Automatic washer for cleaning models from uncured resin residues using SLA technology.
  • Post-processing device compatible with Formlabs Form 2 3D printers.
  • The rotor circulates isopropyl alcohol (IPA), which ensures effective and efficient rinsing of unnecessary material in every detail.
  • The washer is equipped with a special handle, thanks to which we can move the work platform with prints and mount it directly in the washer or remove the model from the work table and place it in the basket.

Advantages:

  • Automatic cleaning - the device will remove the model from the bath after finishing work.
  • 15 minutes - average cleaning time for fresh isopropyl alcohol.
  • 8.6 l - tank volume.
  • 70 prints - the number of cleaned prints for one tank refill.
  • The device's mechanism will automatically remove the models from the IPA after a specified period of time, which is set on a timer. This reduces the risk of damaging the print due to too long soaking in IPA. The models are dry and ready without user participation in the post-processing process.

Packaging:

  • 1 piece.

Product Code: 13527
Brands Formlabs
Formlabs Form Wash - a device for cleaning models after printing

604.58€ +vat

743.63€ incl tax

Product Code: 13529
Qty: 1
Formlabs Form Cure - light polymerization device
Formlabs

756.93€ +vat

931.03€ incl tax

Formlabs Form Cure - light polymerization device

Form Cure light polymerization lamp.

Advantages:

  • 80 °C - an advanced heating system precisely controls the curing temperature.
  • 405 nanometers - optimal wavelength of light for hardening models made of Formlabs materials.
  • 13 multi-directional LEDs emit constant light.
  • 1 revolution per minute - the rotary table ensures uniform exposure of each model.

Exposure improves the properties of photopolymer resin prints:

  • Standard resins achieve better mechanical strength
  • Engineering resins require irradiation to achieve the declared mechanical values
  • Casting resins allow for cleaner firing
  • Curing biocompatible resins is essential for applications in medicine and dentistry
  • The heating system heats the chamber to ensure optimal curing conditions.

Packaging:

  • 1 piece.

Product Code: 13529
Brands Formlabs
Formlabs Form Cure - light polymerization device

756.93€ +vat

931.03€ incl tax

Product Code: 13540
Qty: 3
Formlabs Resin Tank - resin container
Formlabs

59.54€ +vat

73.24€ incl tax

Formlabs Resin Tank - resin container

Resin container compatible with Formlabs Form 2 printer. Sufficient for approx. 20 refills with resin.

Package: 1 pc.

Product Code: 13540
Brands Formlabs
Formlabs Resin Tank - resin container

59.54€ +vat

73.24€ incl tax

Product Code: 13541
Qty: Out Of Stock
Formlabs Resin Tank LT - resin container with extended life for Form 2 printer
Formlabs

99.92€ +vat

122.90€ incl tax

Formlabs Resin Tank LT - resin container with extended life for Form 2 printer

Long life resin container recommended for use with Formlabs Form 2 printer. The manufacturer declares 10 \ u201320x more cycles than for a standard container.

Package:

  • 1 piece.

Product Code: 13541
Brands Formlabs
Formlabs Resin Tank LT - resin container with extended life for Form 2 printer

99.92€ +vat

122.90€ incl tax

Product Code: 13582
Qty: Out Of Stock
Formlabs resin for Castable 1L 3D printer
Formlabs

263.83€ +vat360.56€

324.51€ incl tax

Formlabs resin for Castable 1L 3D printer

First class biocompatible material (EN-ISO 10993-1:2009/AC:2010, USP Class VI), intended for dentists to create precision surgical guides, dental models or similar details.

Packaging:

  • 1 liter

Product Code: 13582
Brands Formlabs
Formlabs resin for Castable 1L 3D printer

263.83€ +vat360.56€

324.51€ incl tax

Product Code: 13889
Qty: Out Of Stock
Castable WAX 1L 3D printer resin
Formlabs

271.72€ +vat371.36€

334.22€ incl tax

Castable WAX 1L 3D printer resin

Resin for jewelry and dental prosthetics.

  • Does not require light polymerization after printing.

The original Castable Wax Resin is intended for the production of lost models in foundry. The material contains 20% wax and, thanks to its properties, does not leave any residue after firing and reflects the contour of the form well. Suitable for precision casting, it allows you to reproduce complex surfaces without visible layer lines. After printing, the models do not require additional hardening.

Also recommended for dental prosthetics:

  • Crowns.
  • Bridges.
  • Partial dentures.
  • Skeletons.

Packaging:

  • 1L

Product Code: 13889
Brands Formlabs
Castable WAX 1L 3D printer resin

271.72€ +vat371.36€

334.22€ incl tax

Product Code: 13904
Qty: 7
Standard 1L resin for Formlabs 3D printer
Formlabs

122.52€ +vat167.44€

150.70€ incl tax

Standard 1L resin for Formlabs 3D printer

The printing material in SLA technology is a liquid photopolymer resin hardened with a laser beam. Formlabs standard materials are the most universal resins for all applications. Strandard resins maintain high model accuracy without the risk of losing strength. Stiffness, durability, the ability to produce advanced details and the final smoothness of the print contribute to the wide use of the resin both in various industries and in medicine.

Colors:

  • Transparent (Clear)
  • White
  • Gray (Grey)
  • Black

Application:

  • Conceptual models and prototypes.
  • Transparent elements.
  • Models requiring a smooth surface.

Physical data:

  • Tensile strength 63 PMa.
  • Elongation at break 6%
  • Shore hardness D75.
  • Modulus of elasticity 2.2 GPa.

Packaging:

  • 1l

Product Code: 13904
Brands Formlabs
Standard 1L resin for Formlabs 3D printer

122.52€ +vat167.44€

150.70€ incl tax

Product Code: 14012
Qty: Out Of Stock
E-Dentstone 1000g resin
Envisiontec

271.23€ +vat

333.62€ incl tax

E-Dentstone 1000g resin

E-Dentstone - for printing models with moving segments.

Package:

  • 1000 g.

Product Code: 14012
E-Dentstone 1000g resin

271.23€ +vat

333.62€ incl tax

Product Code: 14014
Qty: Out Of Stock
E-Guard 1000g resin
Envisiontec

369.87€ +vat

454.93€ incl tax

E-Guard 1000g resin

E-Guard - Resin for printing splints for bruxism.

Package:

  • 1000 g

Product Code: 14014
E-Guard 1000g resin

369.87€ +vat

454.93€ incl tax

Product Code: 14015
Qty: Out Of Stock
E-Partial 1000g resin
Envisiontec

567.13€ +vat

697.57€ incl tax

E-Partial 1000g resin

E-Partial - resin for printing partial dentures.

Package:

1000g

Product Code: 14015
E-Partial 1000g resin

567.13€ +vat

697.57€ incl tax

Product Code: 14016
Qty: Out Of Stock
E-Orthoshape resin 1000g
Envisiontec

191.53€ +vat

235.58€ incl tax

E-Orthoshape resin 1000g

E-OrthoShape is a material that prints in 100 micron layers. It is recommended for the inexpensive production of models from which thermoformed aligners are made.

Physical properties:

  • Tensile strength - 65 MPa
  • Modulus of elasticity in tensile - 1772 MPa
  • Elongation at Break - 6.6%
  • Bending strength - 108 MPa
  • Modulus of elasticity in bending - 2543 MPa
  • Viscosity - 765 cP at 30 ° C
  • Grey colour

Taming:

1000 g.

Product Code: 14016
E-Orthoshape resin 1000g

191.53€ +vat

235.58€ incl tax

Product Code: 14017
Qty: Out Of Stock
E-Appliance M 500g resin
Envisiontec

135.62€ +vat

166.81€ incl tax

E-Appliance M 500g resin

E-Appliance M is ideal for 3D printing of orthodontic models. E-Appliance is a specially designed nano-filled resin that will reliably work with both polyvinyl alcohol separators and tin foil, replacing the "salt and pepper \ u201D" technique in the manufacture of an orthodontic appliance. This method of internal or laboratory construction of removable or fixed orthodontic appliances provides excellent strength and durability combined with an incredible amount of design freedom for individual patient expression. Models that have been printed with E-Appliance offer the detailed precision and high quality surface finish that EnvisionTEC is known to be bonded to a surface that accepts a wide range of separating agents to perfectly remove the finished device from the model.

Package:

500g.

Product Code: 14017
E-Appliance M 500g resin

135.62€ +vat

166.81€ incl tax

Product Code: 14025
Qty: 1
Dreve Resin FotoDent cast 385nm / 405nm red-transparent 1kg
Dreve

275.86€ +vat349.80€

339.30€ incl tax

Dreve Resin FotoDent cast 385nm / 405nm red-transparent 1kg

Light-curing resin for printing skeletons. It burns out without a trace. Red transparent color. The material is highly compatible: it can be used with all commercially available embedding materials.

Material data:

  • Bending strength ≥ 100 MPa
  • Elongation at Break 7.5% -11%
  • Modulus of elasticity ≥ 2000 MPa
  • Final hardness 80-90 Shore D.
  • Color red transparent
  • Viscosity <0.3 Pa · s

Packaging:

  • 1 kg.

Product Code: 14025
Brands Dreve
Dreve Resin FotoDent cast 385nm / 405nm red-transparent 1kg

275.86€ +vat349.80€

339.30€ incl tax

3D printing of prosthetic models - modern technology in the service of dentistry

3D printing is a technology that allows the production of objects with any geometry, including prosthetic models. This is an increasingly popular solution in prosthetic laboratories because it allows for precise and aesthetic prosthetic restorations.

How does 3D printing of prosthetic models work?

In the 3D printing process, a prosthetic model is created based on a digital 3D model. This model can be generated based on a digital scan of the prosthetic field or designed in a computer program.

The 3D printer produces a prosthetic model in layers, applying material in liquid or powder form. Materials for 3D printing prosthetic models include: light-curing resins, metals, acrylic and plastics.

Advantages of 3D printing prosthetic models

  • Accuracy - 3D printing allows you to obtain very accurate prosthetic models.
  • Aesthetics - 3D printing allows you to create prosthetic models with an aesthetic appearance.
  • Flexibility - 3D printing allows you to make prosthetic models of any geometry.
  • Economics - 3D printing can be more economical than traditional methods of making prosthetic models.

Summary

3D printing of prosthetic models is a modern technology that offers a number of advantages over traditional methods. This is a solution that is increasingly used in prosthetic laboratories because it allows for precise and aesthetic prosthetic restorations.

Showing 1 to 50 of 85 (2 Pages)