Product Code: 299
Qty: 4
Aurofilm spray 100 ml or 1000 ml
Bego

22.52€ +vat28.56€

27.70€ incl tax

Aurofilm spray 100 ml or 1000 ml

Aurofilm spray is an agent that reduces surface tension. A reliable preparatory agent, eliminates the hydrophobic effect, thus contributing to the creation of smooth casting surfaces.

Characteristics:

  • Always dry the surfaces after spraying.
  • Wet areas can cause rough casting surfaces.

Packaging:

  • 100ml spray or 1000ml refill

Product Code: 299
Brands Bego
Aurofilm spray 100 ml or 1000 ml

22.52€ +vat28.56€

27.70€ incl tax

Product Code: 300
Qty: 2
Isocera 200 ml Plaster/wax isolator
Bego

41.52€ +vat55.51€

51.07€ incl tax

Isocera 200 ml Plaster/wax isolator

Isocera isolating agent used in the modeling of crowns and bridges.

Characteristics:

  • This agent insulates the wax very well from the plaster model.
  • It works especially well when insulating posts, when wax caps are made in the immersion process.

Packaging:

  • 200ml.

Product Code: 300
Brands Bego
Isocera 200 ml Plaster/wax isolator

41.52€ +vat55.51€

51.07€ incl tax

Product Code: 301
Qty: 2
Wiropaint plus for smoothing models 200ml
Bego

24.43€ +vat

30.05€ incl tax

Wiropaint plus for smoothing models 200ml

Mass for smoothing modeled in wax skeletal dentures.

Characteristics:

  • It makes it possible to obtain a very smooth surface of the casting and significantly reduces the time of post-processing.
  • It does not form a sediment and comes in a form for direct use.

Packaging:

  • 200ml.

Product Code: 301
Brands Bego
Wiropaint plus for smoothing models 200ml

24.43€ +vat

30.05€ incl tax

Product Code: 400
Qty: 61
Izolit SL insulating liquid 1kg of liquid
Chema-Elektromet

6.24€ +vat7.91€

7.68€ incl tax

Izolit SL insulating liquid 1kg of liquid

Isolit SL is a colloidal solution based on alginic acid salts, stabilized with a bactericidal agent and colored.

Used:

  • Intended for insulating the surface of gypsum molds from methacrylate dough.

Usage:

  • The plaster mold, made in a generally accepted manner, should be thoroughly rinsed with a stream of boiling water to completely remove the modeling wax from it. The ease of spreading the insulating liquid and its proper adhesion to the surface of the mold later depend on the good melting of the wax, therefore this operation should be given special attention. Then, pour IZOLIT SL liquid into a small container and, using a soft brush, coat the surface of the gypsum mold, previously brought to a temperature of approx. 40ºC. After a few minutes, it is advisable to reapply a layer of IZOLIT SL on the gypsum. After the insulating layer has dried, you can start forming the methacrylate dough.

Attention:

  • The brush used to coat the gypsum mold should not be immersed directly in the bottle with IZOLITEM SL, because gypsum residues deposited on it may cause gelling of the liquid in the bottle. For the same reason, do not pour the rest of the liquid from the dish into the bottle.

The storage conditions:

  • Contains bronopol. Keep locked up and out of reach of children.

Packaging:

  • 1 kg of liquid

Product Code: 400
Izolit SL insulating liquid 1kg of liquid

6.24€ +vat7.91€

7.68€ incl tax

Product Code: 549
Qty: Out Of Stock
Separating Fluid 500ml
Ivoclar Technical

28.66€ +vat41.47€

35.25€ incl tax

Separating Fluid 500ml

Separating Fluid exhibits exceptional separating properties and thus optimally insulates all denture base materials and ensures smooth surfaces.

  • Insulation: plaster / acrylic, plaster / plaster.

Package:

  • 500 ml.

Product Code: 549
Separating Fluid 500ml

28.66€ +vat41.47€

35.25€ incl tax

Product Code: 598
Qty: 3
Die Lube liquid 50g
Dentaurum

28.70€ +vat39.22€

35.30€ incl tax

Die Lube liquid 50g

Die lube pin insulator liquid. For isolating plaster, plastic and metal stumps from wax, porcelain and plastic.

Characteristics:

  • It guarantees easy removal of caps shaped in wax.
  • It is also used to smooth milled metal surfaces.
  • Does not contain oil.
  • Does not react with silicone.

Package:

  • 50ml.

Product Code: 598
Brands Dentaurum
Die Lube liquid 50g

28.70€ +vat39.22€

35.30€ incl tax

Product Code: 820
Qty: 4
Wax-Fix 50ml
Dentaurum

20.98€ +vat26.61€

25.81€ incl tax

Wax-Fix 50ml

Wax-Fix adhesive for plastic wax stencils and retention beads.

Characteristics:

  • Apply to wet or dry and hardened investment surfaces and plastic surfaces.
  • Glued elements can be easily moved.

Packaging:

  • 50ml.

Product Code: 820
Brands Dentaurum
Wax-Fix 50ml

20.98€ +vat26.61€

25.81€ incl tax

Product Code: 916
Qty: 18
He asked for degreasing silicone surfaces
Emichem

3.58€ +vat4.54€

4.41€ incl tax

He asked for degreasing silicone surfaces

Prosil preparation is intended for degreasing silicone surfaces.

Characteristics:

  • Helps to achieve absolute model accuracy by facilitating the flow of plaster into the impression holes.
  • Prevents the formation of air bubbles.
  • It does not leave any additional layer.

Packaging:

  • 100ml.

Product Code: 916
Brands Emichem
He asked for degreasing silicone surfaces

3.58€ +vat4.54€

4.41€ incl tax

Product Code: 918
Qty: 54
Gipssol gypsum solvent 110g
Emichem

2.53€ +vat3.21€

3.11€ incl tax

Gipssol gypsum solvent 110g

Gipssol is a preparation intended for removing gypsum residues after polymerization in gypsum molds from dentures, plastic crowns, etc. The expected effect is obtained after 2-3 hours. At higher concentrations, the preparation can be used to clean impression trays.

Characteristics:

  • The preparation is used to remove plaster residues from dentures.
  • The agent does not dissolve the insulating layer.

Packaging: - 110g.

Product Code: 918
Brands Emichem
Gipssol gypsum solvent 110g

2.53€ +vat3.21€

3.11€ incl tax

Product Code: 940
Qty: 6
Isofix 2000 gypsum-gypsum insulating liquid 2x1l
Renfert

69.27€ +vat100.24€

85.20€ incl tax

Isofix 2000 gypsum-gypsum insulating liquid 2x1l

Izofix 2000 is a film-free gypsum-gypsum insulator for isolating gypsum layers in foldable models.

Advantages:

  • Seals the plaster surface without creating a film.
  • It penetrates deeply into the surface of the plaster model, clogging the pores and does not change the size of the model.
  • The plaster surface hardens and becomes smooth and non-absorbent.

Packaging:

  • 2 cans x1000 ml.

Product Code: 940
Brands Renfert
Isofix 2000 gypsum-gypsum insulating liquid 2x1l

69.27€ +vat100.24€

85.20€ incl tax

Product Code: 1015
Qty: 20
Vertex Divosep Blue 1000 ml
Vertex-Dental B.V.

14.73€ +vat

18.12€ incl tax

Vertex Divosep Blue 1000 ml

Vertex Divosep Blue.

  • Preparation for isolating acrylic from plaster and plaster from plaster.
  • Universally applicable to both cold and hot curing acrylics.

Packaging:

  • 1000 ml

Product Code: 1015
Vertex Divosep Blue 1000 ml

14.73€ +vat

18.12€ incl tax

Product Code: 1037
Qty: 15
Unipurol to remove impurities
Emichem

5.34€ +vat6.77€

6.56€ incl tax

Unipurol to remove impurities

Unipurol is a concentrate for removing impurities after gypsum, cement, alginates, polishing pastes for degreasing and derusting surfaces.

Characteristics:

  • Especially recommended for ultrasonic cleaners.
  • The liquid does not affect the structure of metal, varnished and plastic surfaces.
  • Does not expose to aggressive action in case of direct contact with the skin /pH 5/.
  • Removal of plaster from dentures and interdental spaces as well as calculus from used dentures.
  • Degreasing metal parts after polishing or before electropolishing.
  • Cleaning trays and tools from alginate impression materials, gypsum and cement residues.
  • Due to the degreasing effect of the liquid, cleaning of spoons and tools can be combined with pre-washing.

Packaging:

  • 1l.

Product Code: 1037
Brands Emichem
Unipurol to remove impurities

5.34€ +vat6.77€

6.56€ incl tax

Product Code: 1155
Qty: 10
Profilm to eliminate the surface tension of wax 100ml
Emichem

4.34€ +vat5.50€

5.34€ incl tax

Profilm to eliminate the surface tension of wax 100ml

Profilm, the preparation is a liquid designed to eliminate the surface tension on the wax elements of skeletal dentures and the wax base of cast crowns and bridges.

Characteristics:

  • It has degreasing and disinfecting properties.
  • It can be used to clean the surface of tools from residues of fats, dyes, resins, waxes, varnishes and plastics.

Packaging:

  • 100ml.

Product Code: 1155
Brands Emichem
Profilm to eliminate the surface tension of wax 100ml

4.34€ +vat5.50€

5.34€ incl tax

Product Code: 1259
Qty: 2
Picosilk 75ml
Renfert

17.78€ +vat22.55€

21.87€ incl tax

Picosilk 75ml

Picosilk preparation for wetting wax models before embedding them in the investment material. Pikosilk is an indispensable preparation in foundry technology because it allows for accurate casting without unnecessary micro-pours.

Renfert catalog number 15500000

Characteristics:

  • Expansion of the surface of the wax model: crowns, bridges, skeletal dentures.
  • Improving the flowability of the investment material at the wax surface in order to make a more accurate casting and easier release from the investment material.

How to use:

  • The wax model prepared for embedding in the casing should be sprayed with Picosilk from a distance of approximately 15 cm.
  • Make sure the surface of the model is quite damp and allow it to dry for a while.
  • Then place the model in the casting ring and pour the investment compound over it.

Packaging:

  • 75 ml spray.

Product Code: 1259
Brands Renfert
Picosilk 75ml

17.78€ +vat22.55€

21.87€ incl tax

Product Code: 1261
Qty: 54
Separate 1000 ml
Emichem

5.05€ +vat6.54€

6.21€ incl tax

Separate 1000 ml

Separate liquid for acrylic-gypsum and plaster-gypsum insulation. Preparation for technical and dental work. It is intended for isolating the surface of plaster molds from acrylic dough for dentures, crown veneers, crowns and other prosthetic works. Creates an insulating membrane of appropriate thickness.

Characteristics:

  • Pink separator has universal use.
  • Blue separator, slowly drying, absorbed by plaster, recommended for pressure techniques, holds well and does not peel off.

Packaging:

  • 1000 ml.

Product Code: 1261
Brands Emichem
Separate 1000 ml

5.05€ +vat6.54€

6.21€ incl tax

Product Code: 1262
Qty: 10
Proisol wax-gypsum insulator 100ml
Emichem

3.40€ +vat4.31€

4.18€ incl tax

Proisol wax-gypsum insulator 100ml

The product prevents the wax from sticking to the plaster model. It is an insulation for wax during all work on plaster models.

Usage:

  • After wetting the model, use an atomizer to spray the surface on which the wax elements will be made.

Advantages:

  • Makes wax models very easy to remove.
  • In addition, it cleans and maintains plastic surfaces.
  • Prevents freezing and defrosts locks.

Packaging:

  • 100ml.

Product Code: 1262
Brands Emichem
Proisol wax-gypsum insulator 100ml

3.40€ +vat4.31€

4.18€ incl tax

Product Code: 2045
Qty: 2-3 Days
DFS Haftkleber glue 25ml
Dfs

8.20€ +vat

10.09€ incl tax

DFS Haftkleber glue 25ml

The adhesive for gluing ready-made wax shapes to models made of investment material leaves a very thin layer.

Attention:

  • Shake well before use.

Characteristics:

  • For use on hardened and unhardened investment models, it is possible to cover the underside of finished parts with wax.
  • The wax shapes adhere firmly and do not loosen due to vibrations of the investment material.
  • Possibility to correct glued elements.

Packaging:

  • 25 ml.

Product Code: 2045
Brands Dfs
DFS Haftkleber glue 25ml

8.20€ +vat

10.09€ incl tax

Product Code: 2119
Qty: 2-3 Days
DFS Haftkleber thinner 25ml
Dfs

7.37€ +vat

9.06€ incl tax

DFS Haftkleber thinner 25ml

Haftkleber glue thinner.

Packaging:

  • 25 ml

Product Code: 2119
Brands Dfs
DFS Haftkleber thinner 25ml

7.37€ +vat

9.06€ incl tax

Product Code: 2250
Qty: 8
Hartebad plaster hardener 125ml
Renfert

19.13€ +vat26.15€

23.53€ incl tax

Hartebad plaster hardener 125ml

Hartebad - a self-curing preparation for covering the surface of plaster models. A single (single-layer) application of the preparation to the plaster surface hardens it and makes it water-resistant. Hartebad does not create a film layer on the hardened surface and does not leave any deposits.

Renfert catalog number 17192000

Characteristics:

  • Thanks to the properties of the Hartebad preparation, it is used to seal the edges of crowns and inlays and onlays marked on the plaster model (e.g. with a pencil).
  • Excellent effects are achieved by using the preparation when modeling the cervical layer.
  • Apply a single, thin layer using a small brush, e.g. size 1 to 4.

Packaging:

  • 125 ml can.

Product Code: 2250
Brands Renfert
Hartebad plaster hardener 125ml

19.13€ +vat26.15€

23.53€ incl tax

Product Code: 2470
Qty: 18
Dissol for dissolving plaster and alginate 1000g
Everall7

12.08€ +vat16.52€

14.86€ incl tax

Dissol for dissolving plaster and alginate 1000g

Preparation for removing plaster and alginate residues. Dissol eliminates the need for mechanical removal of plaster and alginate residues.

Features:

  • During the dissolution of the remnants, the preparation gradually becomes discolored.
  • The fluid can be used many times until it loses color.

Package:

  • 1000g.

Product Code: 2470
Brands Everall7
Dissol for dissolving plaster and alginate 1000g

12.08€ +vat16.52€

14.86€ incl tax

Product Code: 3554
Qty: 133
Copy pencil
Mikran.Pl

1.40€ +vat1.83€

1.72€ incl tax

Copy pencil

Copy pencil.

The core of the pencils is made of erasable clay (not subject to firing), soaked in a water-soluble dye. The copy pencil leaves traces that are resistant to erasure.

  • Pencils are available in two types with red or blue graphite.

Packaging:

  • 1 piece.

Product Code: 3554
Brands Mikran.Pl
Copy pencil

1.40€ +vat1.83€

1.72€ incl tax

Product Code: 3799
Qty: 10
Futura Sep Plus 1000 ml
Schutz Dental

15.96€ +vat21.33€

19.63€ incl tax

Futura Sep Plus 1000 ml

Futura Sep Plus is a one-component insulating material based on alginate for isolating plaster from plastics.

Packaging:

  • 1l.

Product Code: 3799
Futura Sep Plus 1000 ml

15.96€ +vat21.33€

19.63€ incl tax

Product Code: 3851
Qty: Out Of Stock
Picosep 30ml
Renfert

9.29€ +vat12.85€

11.43€ incl tax

Picosep 30ml

Picosep is an excellent dual-function wax/plaster and porcelain/plaster insulator.

Renfert catalog number 15520030

  • To insulate with Picosep, simply apply a thin layer of it with a small brush to the surface of the plaster model.
  • By applying Picosep only once, a micromembrane is obtained sufficient for complete insulation.

Characteristics:

  • Insulation between the plaster stump and the wax cap using the so-called "maczanki".
  • Isolation between the plaster model and porcelain, especially in the cervical and proximal areas.
  • Apply once in a thin layer, even when the crown edge is filled with a large amount of cervical wax.

Packaging:

  • 30ml.

Product Code: 3851
Brands Renfert
Picosep 30ml

9.29€ +vat12.85€

11.43€ incl tax

Product Code: 4068
Qty: 27
Erkoskin 50ml
Erkodent

22.15€ +vat28.67€

27.24€ incl tax

Erkoskin 50ml

Erkoskin is a self-curing material that forms a film layer on the plaster model.

Package:

  • 1pc / 50ml.

Product Code: 4068
Brands Erkodent
Erkoskin 50ml

22.15€ +vat28.67€

27.24€ incl tax

Product Code: 4280
Qty: 17
Gypsolite 1 kg of liquid
Chema-Elektromet

7.19€ +vat9.40€

8.84€ incl tax

Gypsolite 1 kg of liquid

Gipsolit preparation intended for removing plaster remnants from dental dentures and orthodontic appliances.

Advantages:

  • Eliminates the need to mechanically remove plaster remnants.

Application:

  • In order to remove the remains of the plaster, the prosthesis should be placed in the liquid and left for about 24 hours.
  • Wash the cleaned denture under running water and proceed to preparation and polishing.

** The storage conditions:**

  • Store locked up and out of the reach of children.

Packaging:

  • 1 kg. fluid

Product Code: 4280
Gypsolite 1 kg of liquid

7.19€ +vat9.40€

8.84€ incl tax

Product Code: 5002
Qty: 31
Iso-sol 1L
Everall7

7.89€ +vat10.78€

9.70€ incl tax

Iso-sol 1L

The film-forming preparation is used to isolate acrylic from plaster. The preparation does not contain formaldehyde. It has a bacteriostatic effect. Enables easy separation of plaster molds after polymerization. It creates a very thin and smooth film, which guarantees maximum reproduction fidelity. It can be used to isolate plaster from acrylic resins and plaster from plaster.

Advantages:

  • Very good adhesion to plaster.
  • High efficiency, small amount of the preparation ensures effective insulation.

Packaging:

  • 1000 ml.

Product Code: 5002
Brands Everall7
Iso-sol 1L

7.89€ +vat10.78€

9.70€ incl tax

Product Code: 5892
Qty: 5
Hinrisid 250 ml /Gipsil 250 ml
Ehd / Siladent

10.94€ +vat15.83€

13.45€ incl tax

Hinrisid 250 ml /Gipsil 250 ml

Hinrsid /Gipsil agent based on surfactants for silicone and polyether impressions before casting models.

  • After using the preparation, the models are smooth and free of air bubbles.

Packaging:

  • 250 ml spray.

Product Code: 5892
Hinrisid 250 ml /Gipsil 250 ml

10.94€ +vat15.83€

13.45€ incl tax

Product Code: 5929
Qty: 6
Hinrisol 250 ml/Neutrasil 250 ml
Ehd / Siladent

17.96€ +vat24.54€

22.09€ incl tax

Hinrisol 250 ml/Neutrasil 250 ml

Hinrisol /Neutrasil alcohol-based fluid for reducing the tension of silicone surfaces before casting the model from the investment compound.

Attention:

  • Not suitable for alginates, hydrocolloids and polyethers.

Packaging:

  • 250 ml spray

Product Code: 5929
Hinrisol 250 ml/Neutrasil 250 ml

17.96€ +vat24.54€

22.09€ incl tax

Product Code: 6056
Qty: 5
Separating fluid 1000ml
Ivoclar Technical

39.68€ +vat57.41€

48.80€ incl tax

Separating fluid 1000ml

Separating Fluid exhibits exceptional separating properties and thus optimally insulates all denture base materials and ensures smooth surfaces.

  • Insulation: plaster / acrylic, plaster / plaster.

Package:

  • 1000 ml.

Product Code: 6056
Separating fluid 1000ml

39.68€ +vat57.41€

48.80€ incl tax

Product Code: 6123
Qty: 4
GipEx liquid for dissolving gypsum 1L
Ehd / Siladent

15.66€ +vat

19.27€ incl tax

GipEx liquid for dissolving gypsum 1L

Preparation for removing plaster and sediment residues from acrylic, dentures, impression trays, tools, etc.

  • It does not contain acid.
  • It can also be used in ultrasonic cleaners.
  • The solution is ready to use.
  • Do not dilute.

Package:

  • 1 liter

Product Code: 6123
GipEx liquid for dissolving gypsum 1L

15.66€ +vat

19.27€ incl tax

Product Code: 6140
Qty: 1
Vertex Divosep Blue 5 liters
Vertex-Dental B.V.

55.57€ +vat

68.35€ incl tax

Vertex Divosep Blue 5 liters

Vertex Divosep Blue. Preparation for isolating acrylic from gypsum and gypsum from gypsum. Blue for universal use.

Package:

5 l.

Product Code: 6140
Vertex Divosep Blue 5 liters

55.57€ +vat

68.35€ incl tax

Product Code: 6218
Qty: 5
Liquid for impregnation of plaster models, 4.5 l
Ehd / Siladent

37.15€ +vat52.53€

45.70€ incl tax

Liquid for impregnation of plaster models, 4.5 l

Agent for impregnating and polishing plaster models. Perfect for demonstration and orthodontic models.

How to use:

  • Immerse clean and thoroughly dried plaster models in a special solution for 30 minutes.
  • Remove the models and rinse under warm running water. Then dry and polish with a dry, soft cloth.
  • Models treated in this way will have a shiny, dust-free surface.

Packaging:

  • 4.5kg

Product Code: 6218
Liquid for impregnation of plaster models, 4.5 l

37.15€ +vat52.53€

45.70€ incl tax

Product Code: 7783
Qty: 2
Isolat film 1l
Dreve

16.64€ +vat24.09€

20.47€ incl tax

Isolat film 1l

Benefits:

  • Heat-resistant, alginate-based insulating agent that forms a thin layer.
  • It gives smooth and non-porous surfaces.
  • It is suitable for insulating gypsum-gypsum-gypsum, gypsum-silicone.

Package:

  • 1l

Product Code: 7783
Brands Dreve
Isolat film 1l

16.64€ +vat24.09€

20.47€ incl tax

Product Code: 8684
Qty: Out Of Stock
Plastodur preparation for refining plaster stumps 25ml
Dfs

4.53€ +vat6.19€

5.57€ incl tax

Plastodur preparation for refining plaster stumps 25ml

Hardener for plaster surfaces. Good absorption properties and fast hardening.

Characteristics:

  • It improves the performance of insulators (prevents absorption into the model) and protects against abrasion of contact points when checking articulation.

Application:

  • Apply 1-2 thin layers to the surface of the model with a brush.
  • The model is scratch-resistant after 15 minutes.
  • Hard model after 30 min.

Packaging:

  • 25 ml

Product Code: 8684
Brands Dfs
Plastodur preparation for refining plaster stumps 25ml

4.53€ +vat6.19€

5.57€ incl tax

Product Code: 8685
Qty: 1
Isofix plaster-wax insulator 25 ml
Dfs

3.66€ +vat5.00€

4.50€ incl tax

Isofix plaster-wax insulator 25 ml

Isofix plaster-wax insulator. Creates a thin film layer of 3-5 microns.

How to use:

  • Cover the model with a thin layer of the preparation using the brush integrated in the bottle cap and leave for approx. 30 seconds.
  • Gently remove excess fluid by blowing air out.
  • Apply wax or dip in wax.
  • Close the bottle tightly after use.

Packaging:

  • 25 ml

Product Code: 8685
Brands Dfs
Isofix plaster-wax insulator 25 ml

3.66€ +vat5.00€

4.50€ incl tax

Product Code: 8686
Qty: 4
Isofix DFS insulator gypsum - wax 500ml
Dfs

24.34€ +vat33.26€

29.93€ incl tax

Isofix DFS insulator gypsum - wax 500ml

Isofix plaster-wax insulator. Creates a thin film layer of 3-5 microns.

Package:

  • 500 ml

Product Code: 8686
Brands Dfs
Isofix DFS insulator gypsum - wax 500ml

24.34€ +vat33.26€

29.93€ incl tax

Product Code: 8697
Qty: 2-3 Days
DFS Haftspray 75ml spray
Dfs

6.38€ +vat8.71€

7.84€ incl tax

DFS Haftspray 75ml spray

Glue for sticking wax elements on the model.

Directions for use:

  • Possibility to correct the glued elements.

  • Shake well before use.

  • Spray distance: 10-15 cm.

Package:

  • 75 ml

Product Code: 8697
Brands Dfs
DFS Haftspray 75ml spray

6.38€ +vat8.71€

7.84€ incl tax

Product Code: 8698
Qty: 3
Kera - Sep spray 75 ml - spray ceramic separator
Dfs

9.32€ +vat

11.47€ incl tax

Kera - Sep spray 75 ml - spray ceramic separator

Spray Seprator. It isolates the porcelain from the plaster model.

Benefits:

  • Eliminates the possibility of cross-contamination
  • It burns out without residue
  • It does not leave stains in the tangential areas

Application:

  • Spray the model from a distance of 5 - 8 cm and spray a second time after 1 minute.
  • spray the model briefly to avoid streaks.

Package:

  • 75 ml.

Product Code: 8698
Brands Dfs
Kera - Sep spray 75 ml - spray ceramic separator

9.32€ +vat

11.47€ incl tax

Product Code: 8715
Qty: 6
DFS Preparation for removing the surface tension of wax and silicone
Dfs

14.10€ +vat19.27€

17.34€ incl tax

DFS Preparation for removing the surface tension of wax and silicone

Universal preparation for wax and silicone, based on surfactants before model casting.

Features:

  • leaves a smooth surface of the impression and wax model
  • evaporates without residue at room temperature
  • short drying time
  • can be dipped or sprayed

package:

  • 500 ml

Product Code: 8715
Brands Dfs
DFS Preparation for removing the surface tension of wax and silicone

14.10€ +vat19.27€

17.34€ incl tax

Product Code: 8989
Qty: In a warehouse
Outlet DFS Haftkleber 25ml short expiry date 28/06/2024
Dfs

5.33€ +vat10.09€

6.56€ incl tax

Outlet DFS Haftkleber 25ml short expiry date 28/06/2024

DFS Haftkleber 25ml short expiry date 28/06/2024

The adhesive for gluing ready-made wax shapes to models made of investment material leaves a very thin layer.

Attention:

  • Shake well before use.

Characteristics:

  • For use on hardened and unhardened investment models, it is possible to cover the underside of finished parts with wax.
  • The wax shapes adhere firmly and do not loosen due to vibrations of the investment material.
  • Possibility to correct glued elements.

Packaging:

  • 25 ml.

Product Code: 8989
Brands Dfs
Outlet DFS Haftkleber 25ml short expiry date 28/06/2024

5.33€ +vat10.09€

6.56€ incl tax

Product Code: 9436
Qty: In a warehouse
Outlet DFS Thinner for Haftkleber 25ml short expiry date 28/06/2024
Dfs

5.52€ +vat9.06€

6.79€ incl tax

Outlet DFS Thinner for Haftkleber 25ml short expiry date 28/06/2024

DFS Thinner for Haftkleber 25ml. short expiry date 28/06/2024

Packaging:

  • 1 piece

Product Code: 9436
Brands Dfs
Outlet DFS Thinner for Haftkleber 25ml short expiry date 28/06/2024

5.52€ +vat9.06€

6.79€ incl tax

Product Code: 9908
Qty: 5
Wax adhesive 30 ml
Ehd / Siladent

7.22€ +vat

8.88€ incl tax

Wax adhesive 30 ml

Wax adhesive - glue for sticking wax elements. Leaves no traces.

Package:

  • 30ml.

Product Code: 9908
Wax adhesive 30 ml

7.22€ +vat

8.88€ incl tax

Product Code: 10840
Qty: 1
Iso-Stift 1 pc
Renfert

23.73€ +vat31.06€

29.19€ incl tax

Iso-Stift 1 pc

A practical device for isolating plaster from porcelain and wax.

Advantages:

  • Soft and hard tip for specific applications.
  • Economical and precise use of insulating material.
  • Comfortable and easy to use.
  • The flexible tip provides excellent insulation in hard-to-reach places.

Insulation = Picosep.

Packaging:

  • 1pc/4.5ml

Product Code: 10840
Brands Renfert
Iso-Stift 1 pc

23.73€ +vat31.06€

29.19€ incl tax

Product Code: 11033
Qty: In a warehouse
Outlet DFS Haftspray 75ml spray short expiry date 25/08/2024
Dfs

5.31€ +vat8.71€

6.54€ incl tax

Outlet DFS Haftspray 75ml spray short expiry date 25/08/2024

Glue for gluing wax elements to the model. short expiry date 25/08/2024

How to use:

  • Possibility to correct glued elements.

  • Shake well before use.

  • Spray distance: 10-15 cm.

Packaging:

  • 75 ml

Product Code: 11033
Brands Dfs
Outlet DFS Haftspray 75ml spray short expiry date 25/08/2024

5.31€ +vat8.71€

6.54€ incl tax

Product Code: 11298
Qty: 7
GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.
Ehd / Siladent

6.87€ +vat8.71€

8.45€ incl tax

GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.

  • Preparation for a plaster decanter.
  • Prevents clogging of drain pipes.
  • Reduces unpleasant odors.
  • Facilitates cleaning of the clarifier.

Package:

  • 2 tablets + a basket for hanging

Product Code: 11298
GipEx Tabs Basket for hanging + 2 pcs. tablets - test kit.

6.87€ +vat8.71€

8.45€ incl tax

Product Code: 12608
Qty: 2
Tensio-Sil 1l - preparation for the elimination of surface tension - supplement
Protechno

23.13€ +vat27.75€

24.98€ incl tax

Tensio-Sil 1l - preparation for the elimination of surface tension - supplement

Tensio-Sil

  • preparation reducing the surface tension of impression materials, both alginate and silicones.

  • Perfect and smooth models after casting.

Package:

  • 1000 ml - refill

Product Code: 12608
Brands Protechno
Tensio-Sil 1l - preparation for the elimination of surface tension - supplement

23.13€ +vat27.75€

24.98€ incl tax

Product Code: 13173
Qty: Out Of Stock
GO 2011 Speed Solvent for plaster and alginate 2l
Renfert

41.40€ +vat

50.92€ incl tax

GO 2011 Speed Solvent for plaster and alginate 2l

Suitable for quick and thorough cleaning of various instruments and auxiliary materials in only 50% of the time compared to conventional plaster and alginate solvents.

Renfert catalog number 20120000

Advantages:

  • Effective removal of stubborn residues in the cleaning bath and even faster in the ultrasonic device.
  • Ready-to-use solution in a handy canister.

Packaging:

  • 2000ml

Product Code: 13173
Brands Renfert
GO 2011 Speed Solvent for plaster and alginate 2l

41.40€ +vat

50.92€ incl tax

Product Code: 13204
Qty: 6
GipEx decanter tablets 10 pcs.
Ehd / Siladent

26.48€ +vat

32.57€ incl tax

GipEx decanter tablets 10 pcs.

  • Preparation for a plaster decanter.
  • Prevents clogging of drain pipes.
  • Reduces unpleasant odors.
  • Facilitates cleaning of the clarifier.

Package:

  • 10 pcs.

Product Code: 13204
GipEx decanter tablets 10 pcs.

26.48€ +vat

32.57€ incl tax

Showing 1 to 48 of 48 (1 Pages)